澳门太阳网城官网

2022.11 ~ 至今，上海交通大学，澳门太阳网城官网土木工程系，科研/教学，硕士生导师

2021.01 ~ 2022.11，英国兰卡斯特大学，工程学院机械工程，博士后

2018.07 ~ 2022.10，上海交通大学，澳门太阳网城官网工程力学系，博士后

2014.09 ~ 2018.06，上海交通大学，澳门太阳网城官网土木工程系，博士

玻璃幕墙/结构系统（Glass façade/structural system）

无机非金属基复合材料（Inorganic nonmetallic matrix composites）

结构功能一体化材料（Structural and functional integrated materials）

能源收集和传感技术（Energy harvest and sensing）

结构数字化运维（Digital maintenance of structure）

国际材料与结构研究实验联合会(RILEM)会员

英国结构工程师学会(IStructE)会员

美国土木工程师学会(ASCE)会员

中国复合材料学会会员

中国硅酸盐学会会员

中国建筑学会新材料结构学术委员会会员

中国建筑金属结构协会检测鉴定加固改造分会会员

意大利国家科研评估委员会（CNVR）通讯评审专家

国际ESCI期刊《Modelling and Simulation in Engineering》编委

国际SCI期刊《Sustainability》客座主编

Engineering Structures, Construction and Building Materials, Journal of Vibration and Control, Pattern Recognition Letters, Structures等国际期刊审稿人

[1]   国家自然科学基金青年项目，51908352，考虑开裂层表征和残余作用的结构玻璃开裂后性能预测模型研究，2020-01至2022-12，主持。

[2]   冲击与安全工程教育部重点实验室开放基金，CJ201906，刚体冲击作用下建筑夹层玻璃体系失效机制研究， 2019-07至2021-07，主持。

[3]   国家自然科学基金面上项目，52078293，“新型梯度中间膜对结构玻璃开裂后承载性能提升研究”，2021-01至2024-12，主要研究人。

[4]   英国工程和物理科学研究委员会（EPSRC）项目，EP/T020695/1，基于微观试验和数值方法的混合胶接节点失效机制和优化设计，2021-01至2023-01，主要完成人。

[5]   国家自然科学基金面上项目, 51978398，“复材栅格/喷射ECC加固受火后钢筋混凝土受弯构件的界面力学及设计方法”, 2020-01至2023-12，主要参与人。

[6]   上海市科委“科技创新行动计划”社发项目，20dz1201301，基于人工智能的物业风险管理处置及预测关键技术与系统，2020-09至2023-08，项目联系人。

[7]   国家自然科学基金青年项目, 51808335, 超高海上混凝土风力发机塔架-基础结构在风浪荷载作用下的结构改进及疲劳损伤特征, 2019-01至2021-12, 主要参与人。

[8]   科技部“十三五”国家重点研发计划课题，2017YFC0806103，“城镇建筑结构运维安全保障关键技术”第三课题“玻璃结构防倒塌关键理论和技术”，2017-07至2021-06，主要完成人/课题联系人。

[9]   上海市科委“科委创新行动计划”重点专项，17DZ1200306，“既有玻璃幕墙安全健康预警技术和安全性能提升技术研究”，2017-07至2020-06，主要完成人/课题联系人。

[10]  国家自然科学基金面上项目，51378308，“建筑玻璃结构刚体冲击下的破坏机理及预测模型研究”，2014-01至2017-12，主要完成人。

发表论文50余篇，其中SCI收录近40篇，第一/通讯作者论文20余篇，论文引用逾620次，ESI高被引1篇。

第一作者/通讯作者论文：

[1]  Pan, Z., Yang, J., Wang, X.E. ^*, Zhao, C., Wang, Y., Zhu, Y. (2024) Assessment on flexural performance of monolithic glass considering spatial and depth characteristics of scratches. Engineering Fracture Mechanics, 109964.

[2]  Xie, D., Yang, J. ^*, Zhao, C., Wang, X. E. ^* (2023). Comprehensive investigation into the thermal rheological behaviour and relaxation characteristic of single/composite polymers in laminated glass. Thin-Walled Structures, 195, 111369.

[3]  Zhu, Y., Yang, J., Wang, X. E. ^*, Xie, D., Hou, X. (2023). Morphological characterization and reconstruction of fractured heat-treated glass. Journal of Non-Crystalline Solids, 616, 122455.

[4]  Yang J., Zhao C., Zhang Y., Wang X.E.^* Wang Y., Xie D., (2023) Constitutive models for temperature-, strain rate- and time-dependent behaviors of ionomers in laminated glass. Journal of Materials Science, https://doi.org/10.1007/s10853-023-08222-y.

[5]  Wang, X. E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J., Hou, X., (2023) Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model. Theoretical and applied fracture mechanics, 124, 103760.

[6]  Wang, X.E., Pang, K., Huang, X., Yang, J., Ye, J., Hou, X. (2023) Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness. Engineering Fracture mechanics, 277, 108954.

[7]  Wang, X. E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J., Hou, X., (2022) Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming. International Journal of Adhesion and Adhesives, 118, 103230.

[8]  Wang, X.E., Kanani A., Pang K., Yang J., Ye J., Hou X., (2022) A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives. Thin-Walled Structures, 180, 109985.

[9]  Yang J., Wang Y., Wang, X.E.^*, Hou X., Zhao C., (2022). Local bridging effect of fractured laminated glass with novel hybrid interlayers under weathering actions. Construction and Building Materials. 314:125595.

[10] Wang, X.E., Huang, X.H.^*, Yang, J., (2021). Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact. International Journal of Mechanical Science. 206: 106613.

[11] Huang, X.H., Wang, X.E.^*, Yang, J., Pan, Z., Wang, F. (2021). Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage. Thin-Walled Structures. 167: 108137.

[12] Wang, X.E.^*, Yang, J., Huang, X., Wang, F. (2021). Voronoi-FDEM concept for modelling post-fracture response of progressively damaged structural glass. Engineering with Computers. doi:10.1007/s00366-021-01318-6

[13] Pan, Z., Yang, J., Wang, X.E.^*, Wang, F., Azim, I. (2021). Image-based surface scratch detection on architectural glass panels using deep learning approach. Construction and Building Materials. 282:122717.

[14] Wang, X.E., Meng, Y., Yang, J., Huang, X., Wang, F., Xu, H. (2021). Optimal kernel extreme learning machine model for predicting the fracture state and impact response of laminated glass panels. Thin-Walled Structures. 162:107541.

[15] Wang, X.E., Yang, J., Chong, W.T., Qiao P., Peng, S., Huang, X. (2020). Post-fracture performance of laminated glass panels under consecutive hard body impacts. Composite Structures. 254:112777.

[16] Sadeghian, M.A., Yang, J., Wang, X.E.^*, Wang, F. (2021). Novel adaptive tuned viscous inertance damper (ATVID) with adjustable inertance and damping for structural vibration control. Structures, 29:814-822.

[17] Wang, X.E., Yang, J., Pan, Z., Zhu, Y. (2020). Exploratory investigation into the post-fracture model of laminated tempered glass using combined Voronoi-FDEM approach. International Journal of Mechanical Sciences. 105989.

[18] Wang, X. E., Yang, J., Liu, Q., & Zhao, C. (2018). Experimental investigations into SGP laminated glass under low velocity impact. International Journal of Impact Engineering, 122, 91-108.

[19] Wang, X. E., Yang, J., Wang, F., Liu, Q. F., & Xu, H. (2018). Simulating the impact damage of laminated glass considering mixed mode delamination using FEM/DEM. Composite Structures, 202, 1239-1252.

[20] Wang, X. E., Yang, J., Liu, Q. F., Zhang, Y. M., & Zhao, C. (2017). A comparative study of numerical modelling techniques for the fracture of brittle materials with specific reference to glass. Engineering Structures, 152, 493-505.

[21] 王义戈，王星尔^*，杨健，刘强. 考虑碎片膨胀效应的物理钢化夹层玻璃开裂后变形分析模型[J].应用力学学报, 2022.

[22] 朱禹翰, 杨健, 王星尔^*, 张凯, 王义戈. 热处理玻璃裂纹形态试验及维诺形态表征方法研究[J].硅酸盐学报, 2022,50(02):482-491. (封面论文)

[23] 王星尔, 杨健, 王翰坤. 夹层热钢化玻璃裂纹形态表征及开裂后力学行为[J]. 硅酸盐学报, 2019(8):1039-1046.

合作论文

[1]  Nazar, S., Yang, J., Wang, X. E., Khan, K., Amin, M. N., Javed, M. F., ... & Ali, M. (2023). Estimation of strength, rheological parameters, and impact of raw constituents of alkali-activated mortar using machine learning and SHapely Additive exPlanations (SHAP). Construction and Building Materials, 377, 131014.

[2]  Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E., Ye, J. (2023). Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method. Engineering Structures, 277, 115428.

[3]  Wang, F., Shah, S., Wang, X., Wang, X. E., Zhang, W. X., Pang, B., & Yang, J. (2022). Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse. KSCE Journal of Civil Engineering, 26(4), 1782-1792.

[4]  Liu, Q. F., Hu, Z., Wang, X. E., Zhao, H., Qian, K., Li, L. J., & Meng, Z. (2022). Numerical study on cracking and its effect on chloride transport in concrete subjected to external load. Construction and Building Materials, 325, 126797.

[5]  Zhao, C., Yang, J., Wang, X.E., Ren, M., Azim, I. (2021). Investigation into short term behaviors of embedded laminated glass connections with various configurations. Construction and Building Materials. 297:123687.

[6]  Zhang H, Wang F, Yang J^*, Wang X.E. (2021). Evaluation on the behaviour of screwed CFS joints subjected to combined loading. Journal of Constructional Steel Research. 2021; 180:106582.

[7]  Wang, F., Yang, J., Wang, X.E., Azim I. (2021). Study on progressive collapse behaviour of steel-framed substructures with sheathed CFS stud infill walls. Journal of Building Engineering. 102720.

[8]  Meng, Y., Wang, X.E., Yang, J., Xu, H., Zhang, J. (2021). Research on machine learning based model for predicting the impact status of laminated glass. Journal of Inorganic Materials. 36(01):61-68.

[9]  Huang, X., Yang, J., Bai, L., Wang, X.E. (2020). Theoretical solutions for auxetic laminated beam subjected to pulse load. Structures. 28:57-68.

[10] Huang, X., Yang, J., Wang, X.E., Azim, I. (2020). Combined analytical and numerical approach for auxetic FG-CNTRC plate subjected to a sudden load. Engineering with Computers. 10.1007/s00366-020-01106-8.

[11] Huang, X.H., Yang, J., Azim, I., Wang X.E., Ren, X. (2020). Geometric nonlinear analysis of auxetic hybrid laminated beams containing CNT reinforced composite materials. Materials. 13, 3718.

[12] Huang, X.H., Yang, J., Azim, I., Ren, X. Wang X.E. (2020). Characterization of static and dynamic response of auxetic hybrid FRC/CNTRC laminated plates. Nanotechnology Reviews. 9(1): 1625-1642. doi:10.1515/ntrev-2020-0106

[13] Hu, Y., Yang, J., Baniotopoulos, C., Wang, X.E., Deng, X. (2020). Dynamic analysis of offshore steel wind turbine towers subjected to wind, wave and current loading during construction. Ocean Engineering, 216,108084.

[14] Zhao, C., Yang, J., Wang, X. E., & Azim, I. (2019). Experimental investigation into the post-breakage performance of pre-cracked laminated glass plates. Construction and Building Materials, 224, 996-1006.

[15] Zhang, Y. M., Wang, X. E., Yang, J. (2018). Experimental Study of Multiple Layered SGP Laminated Glass under Hard Body Impact. Journal of Inorganic Materials, 33(10), 1110-1118.

[16] 谢东东, 杨健, 王星尔, 赵宸君. (2022). 夹层玻璃PVE中间膜热流变行为及松弛特性[J]. 中南大学学报:自然科学版, 53(11), 4523-4533.

[17] 张强, 杨健, 王星尔, 徐涵, 孟嫣然. 基于结构响应向量和支持向量机的框支承玻璃幕墙连接松弛状态智能识别[J].硅酸盐学报,2020,48(10):1682-1688.

[18] 赵宸君，杨 健，王星尔，黄小坤，刘 强. 基于国内外标准的结构用玻璃构件承载性能设计对比[J].建筑结构学报, 2022, 43(3):212-222.

[19] 黄栩浩, 杨健, 王星尔, 任鑫. (2022). 负泊松比碳纳米管增强层合结构预测与设计[J]. 应用力学学报, 38(4), 1408-1414.

[20] 任明根, 杨健, 高皖扬, 王星尔, 赵宸君. (2021). 温度作用下热塑及热固性中间膜拉伸与撕裂性能研究[J]. 新型建筑材料, 48(5), 1-6.

[21] 徐涵, 杨健, 王星尔, 等. 反向传播神经网络在隐框玻璃幕墙脱胶损伤识别中的应用[J]. 硅酸盐学报, 2019(8)：1073-1079.

[22] 刘炘炜，杨健，王星尔，刘强. 冲击致损的夹层玻璃板开裂后的静载强度[J]. 上海交通大学学报, 2020, 54(3): 227-238.

指导PRP与本科生毕业设计等

任本科生导师

 参编标准

[1]    国际标准 ISO 21712-2020, Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics, 已发布，主要完成人

[2]    国家标准 GB/T 39826-2021，精细陶瓷 界面弯曲强度测定 四点弯曲法，已发布，主要完成人

[3]    中国工程建设标准化协会标准 T/CECS 1099-2022，玻璃结构工程技术规程，已发布，主要完成人

[4]    上海市建筑学会团体标准 T/ASSC MQ01-2021，座地式全玻璃幕墙技术标准，已发布，主要完成人

 专利与知识产权

[1]    发明专利：一种半主动调谐质量惯性阻尼器，2021-07，CN 111503202 B

[2]    发明专利：无级变速器及半主动调谐粘滞惯性阻尼器，2021-02，CN 110985602 B

[3]    实用新型专利：一种全自动玻璃面板微裂纹检测平台，2020-09，CN 211528246 U

[4]    实用新型专利：一种拆装式多功能试验台，2019-12，CN 209829038 U

[5]    实用新型专利：一种玻璃幕墙脱胶检测装置，2020-02，CN 210037556 U

[6]    实用新型专利：一种用于提升装配式混凝土结构延性的钢筋连接器，2020-05，CN 210622118 U

[7]    软件著作权：全玻璃面板安全性智能监测及分析软件，2018-11，2018SR996322

[8]    软件著作权：基于组合有限离散元法的玻璃结构破坏仿真模拟软件，2020-01，2021SR0478213

2023.01 “华夏建设科学技术奖”一等奖，玻璃结构关键技术和设计方法研究与应用